Noise Logger & Vibration Monitoring
Our acoustic engineers know what equipment is right for the job. Below are some of the noise logger and vibration monitoring equipment that help us get the most accurate data for your project.
Most are available for hire should you need noise or vibration monitoring for your business or project. Once installed on site by our friendly team, we can monitor noise and vibration relevant to any limits. Visit our Noise and Vibration Monitoring page to find out more!
Our engineers can also complete room to room sound insulation testing for impact and airborne noise. We specialize in Building Code of Australia compliance. Visit our Building Acoustics page for more information!
If there a noise that only happens intermittently or outside of normal business hours? Our NTI XL2 unit can complete unattended noise logging including frequency analysis with audio recordings. This enables our team to listen back to recordings and know exactly when, for how long and at what level a noise source was active. Applications include but are not limited to carpark ventilation, HVAC condensers, pool pumps, music venue noise, and industrial plant and machinery.
SVAN 957 Sound Level Meter
The SVAN 957 is an all digital, Type 1 sound & vibration level meter and analyser. The instrument is intended for general acoustic and vibration measurements, environmental monitoring, and occupational health and safety monitoring.
AVAtrace Vibration Monitor
Predominantly this instrument is used in the monitoring of residences or structures abutting construction sites where piling or excavation is taking place. The field instrument can be fully controlled via the AvaNet website.
Change the settings, limit values or check the battery level, do it quickly and easily from your browser, wherever you are. Text message alerts allow the party to immediately be notified of exceedance and then either mitigate or change the method of demolition/construction.
SVAN 958A Sound and Vibration Monitor
The SVAN 958A Class 1 Four-channel Sound & Vibration Analyser is dedicated for all applications that require a simultaneous class 1 sound and vibration assessment.
SVAN offer an online portal and smartphone application for real-time alerts and analysis.
Bruel & Kjaer Tapping machine
Available upon request.
The B&K Tapping Machine Type 3207 is an impact sound generator for measuring impact sound insulation of existing floor/ceiling assemblies.
Our engineers use this device to measure the sound insulation provided by a floor/ceiling system between two dwellings when there is a complaint regarding footfall or impact generated noise. It can also be used to assess test panels of proposed flooring.
NTI XL2 Type 1 Sound Level Meter and Logger
Besides being an advanced, integrating Sound Level Meter, the XL2 measures RTA and FFT high-resolution spectra, RT60 Reverberation Time, Polarity, Delay and THD+N. Optional features are speech intelligibility STIPA, extended acoustics functions, noise curves, cinema calibration, pass/fail analysis and remote measurement acquisition.
Noise Sentry NSRT Mark 3 Type 1 by Convergence Instruments
The Sound Level Meter Data Logger NSRT_mk3 is the third generation of Convergence Instrument’s smart integrating sound-level meter/datalogger. It includes a type 1 digital MEMS microphone, an accurate date/time clock, and a non-volatile 128 Mb recording memory with a fast USB download.
Contact Us Today
If you are in need of noise and vibration management services, then contact Audiometric & Acoustic Services today. Our vibration consultancy firm can assist you with vibration measurement and noise control solutions in Melbourne, Victoria and the surrounding areas. Call us on 03 9817 5517 or email [email protected] with any questions. Or use the form below to request a callback.